How do I wire a cable outlet? The house is pre-wired but they only dropped the wire behind the faceplate? - cable tv tools
My house is prewired for cable TV, everywhere. But do in the real world, not the outlets - all cable drop line on the wall behind the face plates for the plug. But do not plug the cord into the jack on the board. I did get the cable companies, and "The Wire" outlets that I thought I would. Then I decided I need one of these "pre-wired" connection by wire, so I really can hang a flat screen on a wall. I bought an electrician wire stripper and left no tools RG6 connectors. Can I use it myself? Can I borrow an electric shock? Do I have the cable companies to get out? It is very expensive. Note I do not know all the techies words ...
Thank you very much!
Saturday, January 16, 2010
Cable Tv Tools How Do I Wire A Cable Outlet? The House Is Pre-wired But They Only Dropped The Wire Behind The Faceplate?
4 comments:
It is not difficult. You should take the plate, can (to take a wire cutter, even with a pair if you're not careful!)
Cut the cable jacket (sorry, I do not know the words - usually black) and put the copper wire about 1 / 4 inches. This should fit into the hole in the front panel, if not a goal to be set up to it - sold in hardware stores to buy. Then put the side on the back plate and the cable should work. (oh, you need a cable to the faceplate and television, but you get used, dass)
The idea is that the copper cable from the wall and the cable of copper wire from the button on the TV. I doubt shocked. It was not.
Good luck. I'm an idiot - with trends Sevant electric, but have not used book and it has worked well.
It's easy. There are two types of connectors that you can buy. A twist on you and the other will attach a crimp down the cable connector. In my experience, the change must resolved in the manner of a small muscle, and if not done well, if you pull the cable. The crimp tool works much better, and wire stripper may be able to do the job.
Then connect the cables in the front panel cable TV. It is similar in appearance to an electrical outlet. Then simply plug the cord into the wall and is in the business.
Here I answer your question, so do not get an electric shock.
Take the front and unplug the power cord for you to remove about 3 / 4 in the outer casing of the cable, you should use a network of copper or aluminum jacket to see a clear plastic bag with a wire. Spread the fabric jacket open, clear up their sleeves to expose about 1 / 4 in the thread, press the wire and the transparent layer on your connection in the hole with a cardigan on the tube bodies is a little hole you You plug in the instructions and attach the front panel.
I think if you need an additional outlet for the cable, so it's only a matter of fixing a connection to the end of a rope that has been done by the existing stores. At some point, you are a cable splitter, a small tear that has one input and two outputs, they need to and run an extra length of cable through the wall somehow (in May of this year while going through all the nails, the on where the next exit is available), to the point where you want to hang your flat-screen TVs. As a rule needs to be drilled under construction through the bolt holes through the center pole, not a prime cut into the surface, so it must break the wall in places is the drilling of holes and then cable thought fish tacos, are included where they want to be. If there is an exit directly below where you want to be, then it's simply a matter of operating a hotline, but has not yet reached a point for connecting a new length of cable and the reduction of resources can be a hole in the wall of a existing Outland reach the cables on the wall. You will not electrocute you, there's nothing on cable TV, you Zap. Normally, the cable connections in a Box is made, it will give you access to the connection later in the event of problems. Then, after everything that attach the stains on the wall, where he has to open it to repaint, and. There is a reason why it's a bit expensive. This is a reasonable abount of work and time.
Post a Comment